Description

• Cam surfaces have no wear marks.
• Spring pins also do not have any wear marks.
• Overall height – 2.118″.
• Thickness of flange – 0.127″.
• Diameter of shank above slot – 0.560″.
• Diameter of shank below contact points – 0.590″.
• Diameter of contact on flat surfaces – 0.614″.
• Diameter of contact on opposite high points – 0.670″.
• Shank does not have a groove at the same height as the pins for the springs.
• On the flange surface adjacent to on of the spring pins is stamped “63”.