• (1) Lower Vent Window Hinge Spring (ST1-01973)
• (1) Lower Vent Window Pivot Mount Nylon Shoulder Washer (ST1-03015)
• (1) Lower Vent Window Pivot Mount Nylon Flat Washer (ST1-02431)
• (2) Vent Window Hinge to Frame Mount Rivets

The post Door Side Curtain Vent Window Lower Hinge Repair Kit, New appeared first on Corvette & Classic Car Parts Store.

• Upper Vent Window Pivot Mount Screws (2) (ST3-0045)
• Upper Vent Window Pivot Mount Nylon FW (2) (ST1-02431)
• Upper Vent Window Pivot Mount Screw LW(2) (ST3-0147)
• Upper Vent Window Pivot Mount Screw Hex Jam Nut (2) (ST1-03033)
• Lower Vent Window Pivot Mount Nylon Shoulder Washer (2) (ST1-03015)
• Lower Vent Window Pivot Mount Nylon FW (2) (ST1-02431)
• Vent Window Hinge to Frame Mount Rivets (16)
• (2) 8-32 x 7/16″ Slotted Round Head machine screws
• (2) 8-32 hex nuts
• (2) #8 lock washers with 9/32″ OD

The post Door Side Curtain Vent Window Hinge Repair Kit, New appeared first on Corvette & Classic Car Parts Store.

The post Seat Belt, Firestone Model RCF-67 lap belt with tan cover. appeared first on Corvette & Classic Car Parts Store.

The post Seat belt, Hamill Model RCF-67 appeared first on Corvette & Classic Car Parts Store.

The post Seat belt, Hamill Model RCF-67, appeared first on Corvette & Classic Car Parts Store.

Lap Belt

• Hamill Model RCF-67, White Cloth Enclosed in Tan vinyl cover.
• It has the seat belt alarm wiring.
• Measures 8-7/8″ long.
• It does not have a Hamill Tag.
• Buckle is stamped Hamill RCF-67 & 660.
• Floor anchor plate is stamped H10 & 1100.
• Female latch has RCF-67 & 660 stamped on the back.
• Script on the back of the buckle reads (all in cap letters):
  • Important
  • Always wear lap belt;
  • Keep it low and snug.
  • Tighten belt by returning
  • excess to retractor or by
  • pulling on loose end of belt
  • extending from latch plate
  • Reads owners manual
  • Hamill (inside a box with a verticcal line on the left side of the box and a horizontal line in the lower 1/4 of the box.
  • RCF-67
  • 099
• Spring for push button release works.
• Stamped on the male buckle is “H” and the numbers “800”.
• Floor mount plate is stamped H10 & 1100.
• Sleeve measures 7-3/4″ long.

The post (sold 3/16/25) Seat Belt, Hamill model C15, Coupe Saddle lap belt only. appeared first on Corvette & Classic Car Parts Store.

• Cloth is dirty & stained.
• Has one 1/4″ size frayed area where it enters the retractor.
• Tag has GM, GM part # 468123.
• The “Mocel C75” and a date code part of the tag is torn off and missing.
• Retractor has some light corrosin of the plating and works fine.
• Chrome is nice on the buckle.

RH

• Material too has some dirt and stains.
• Has the GM tag with GM, part # 468124, Model C75, and a date of 47E79
• It also has the seat belt alarm wire.
• Retractor has some light corrosion of the plating.
• Retractor works fine.

The post Seat Belt, Firestone Model C75 Red LH & RH Pair with Retractors. appeared first on Corvette & Classic Car Parts Store.

• 1 side only
• Webbing is significantly stained.
• Small retractor is frozen up.
• Large retractor works and is not frozen up

Lap Belt

• Has seat belt warning wiring.
• There is no plastic plug on the end of the wires.
• Oyster color with black cloth belt.
• Buckle is stamped RCF-67 & 290 1772 F.
• Floor mount bracket is stampd B10 & D207.
• Belt & sleeve measures 8-1/2″ long

The post Seat Belt, Firestone model C55 White RH Shoulder & Lap Belt. appeared first on Corvette & Classic Car Parts Store.