fiberglass Archives - Corvette & Classic Car Parts Store

Nose to Valence Bonding Strip, RH Inner New.

John — Mon, 13 Nov 2023 14:42:49 +0000

John — Fri, 29 Sep 2023 17:33:53 +0000

Removed from a late July build date 63 Corvette.
If you have a 63 built prior to July 31, 1963, then your buckets were fiberglass and not pot-metal.
These are correct for Corvette’s built prior to this date.
We know as these were taken off a 1963 with a July 31, 1963 build date.
Probably, one of the last cars built in 1963 with fiberglass buckets.
These look “different” because a previous owner decided to BONDO over the headlight buckets and move the headlights to the grille area.
n order to get the buckets out intact, they were cut out of the front clip
Everything is there; all the fiberglass parts of the buckets.
NO tabs are broke or bent.
Includes some of the headlight mount brackets, and the header mount braces too.
It was all cut it out so as to not damage the fiberglass buckets.
The right side bucket will need to have the outer fiberglass panel re-glued to the bucket.
It’s not broke; it just came loose from the bucket when I removed it.
About 1/16″ or so of Bondo will need to be sanded off
- it was that bad of a repair.
These are real, and very nice (although the pictures don’t show that)

John — Wed, 27 Sep 2023 17:49:23 +0000

This is the piece of fiberglass that holds the anchor plate for the rear T-Top mount Wedge
It also holds your door window glass rear weatherstrip (includes the weatherstrip aluminum mount plate.)
GM part # molded in the fiberglass is 342226.
This number changed in 1975 to 345468.
Includes the anchor plate and original weatherstrip

John — Wed, 27 Sep 2023 17:43:24 +0000

This is the piece of fiberglass that holds the anchor plate for the rear T-Top mount Wedge
It also holds your door window glass rear weatherstrip (includes the weatherstrip aluminum mount plate.)
GM part # molded in the fiberglass is 342225.
This number changed in 1975 to 345467.
Includes the anchor plate and original weatherstrip

John — Sat, 23 Sep 2023 19:59:54 +0000

This is a hand laid, one piece design incorporates the LH and RH fender extensions.
You will need to trim off the upper and lower center sections to meet your needs.
It will take some work to get this to fit your original fiberglass

John — Sat, 23 Sep 2023 15:33:09 +0000

Trunk Spare Tire Storage, "1/2 Moon" Fiberglass Mold. 53-55 Corvette

John — Wed, 13 Sep 2023 16:31:24 +0000

Right Side
- This is the lower right side fiberglass piece of the frame and includes the inner and reinforcement.
- Fiberglass is solid with no other cracks or breaks.
- Includes the right side mount bracket, plate, screw, and special nut.
- This is piece #21 in th 63 AIM C07.3 page.
- I’m sure it is on a similar page of 64-67 AIM’s.
Left Side
- This is the fiberglass piece of the frame.
- Fiberglass is solid except the 6″ piece that broke off clean.

John — Thu, 07 Sep 2023 17:18:53 +0000

John — Thu, 07 Sep 2023 17:16:40 +0000

In excellent condition

Does not have a manufactures stamp

May be correct for other years also

John — Thu, 07 Sep 2023 17:09:08 +0000

In excellent condition and has the “C” stamp.

May be correct for other years also