control Archives - Corvette & Classic Car Parts Store

Hood Latch Adjuster Screw, New Pair.

John — Tue, 14 Nov 2023 18:06:43 +0000

Includes 2 flat washers & 2 hex nuts. Screws are 1/4-20 x 2″ long. Fits:
65 Chevelle, Clutch release switch bracket screw
Chevy Car
49-56, hood bumper screw
49-50, All exc. SW, Sedan Delivery, tail gate bumper support screw
62-65, All, Cruise Control Switch to Clutch pedal bracket screw
60 Chevy Truck, Series 10-30, hood bumper screw
65-67, All. hood bumper screw
66, All w/8 cyl, Clutch release switch bracket screw
Corvette, 53-76, hood bumper screw

The post Hood Latch Adjuster Screw, New Pair. appeared first on Corvette & Classic Car Parts Store.

Stud, 3/8″-16-16 x 1-49/64″ long, New Reproduction of GM 3731702

John — Sun, 12 Nov 2023 19:38:40 +0000

This goes on the exhaust or intake manifold and is used to mount the following. Fits:
60-69 Corvair, Carburetor mounting (RH)
60-67 Chevy car, speed/cruise control mount bracket
38-67 Chevy, Chevy II carb. mount
64-67 Chevelle Carb. Mount
67 Camaro Carb. mount
Corvette
57 FI Filter to Intake
61-62 Overflow Tank Mount
53-72, various
67-72, cruise control mount
63-65 Crankcase vent
63-65 GF-90 Fuel Filter Bracket
70-74 Spark Control Solenoid

The post Stud, 3/8″-16-16 x 1-49/64″ long, New Reproduction of GM 3731702 appeared first on Corvette & Classic Car Parts Store.

Transmission Control Bell Crank Rod , Auto, Original.

John — Tue, 31 Oct 2023 17:35:03 +0000

Rod has the Up “Arrow” and the letters “UP” stamped on it.
Includes the spring, flat washer and, cotter pin to the bell crank.
Fits:
53-58 Chevy cars w/PG
53-58 Corvette w/PG

The post Transmission Control Bell Crank Rod , Auto, Original. appeared first on Corvette & Classic Car Parts Store.

Control Cable Wire Steel Fiber Coated Outer Case, New

John — Sun, 01 Oct 2023 16:23:11 +0000

Used on most GM vehicles for heater, fresh air vent, etc. cables.
Measures 0.190″ OD and an 0.096″ ID.
Price is per inch of casing.

The post Control Cable Wire Steel Fiber Coated Outer Case, New appeared first on Corvette & Classic Car Parts Store.

Control Cable Wire, New.

John — Sun, 01 Oct 2023 16:20:47 +0000

Used on most GM vehicles for:
- Heater / defroster control cable
- Fresh air vent
- Hood latch release
- Deck / truck compartment lid
- Wiper control
- Bowden cables
- Choke / throttle
- AC control cables
- Seat Spring Binding Wire
- And many more
Wire is 0.055″ diameter
Price is per inch of wire.
- Be sure to add and inch or 2 if you need to coil one end into a loop for mounting.

The post Control Cable Wire, New. appeared first on Corvette & Classic Car Parts Store.

Control Cable Wire, New.

John — Sun, 01 Oct 2023 15:44:29 +0000

Used on most GM vehicles for:
- Heater / defroster control cable
- Fresh air vent
- Hood latch release
- Deck / truck compartment lid
- Wiper control
- Bowden cables
- Choke / throttle
- AC control cables
- Seat Spring Binding Wire
- And many more
Wire is 0.060″ diameter
Price is per inch of wire.
- Be sure to add and inch or 2 if you need to coil one end into a loop for mounting.

The post Control Cable Wire, New. appeared first on Corvette & Classic Car Parts Store.

Electric Fuel Control Module Bracket, Upper Original GM 14062576.

John — Mon, 25 Sep 2023 14:42:11 +0000

A one year only part with the GM part number on it. In very good condition with no cracks or breaks. Mount holes are solid.

The post Electric Fuel Control Module Bracket, Upper Original GM 14062576. appeared first on Corvette & Classic Car Parts Store.

Electric Fuel Control Module Housing Upper Bracket, Original GM 14080604

John — Mon, 25 Sep 2023 14:41:01 +0000

Electric Fuel Control Module Housing Upper Bracket, Original GM 14080604. 85-89 Corvette

The post Electric Fuel Control Module Housing Upper Bracket, Original GM 14080604 appeared first on Corvette & Classic Car Parts Store.

Heater Control Valve, Original.

John — Sun, 24 Sep 2023 12:34:11 +0000

Stamped with the GM part # 3139137 and, “J8” (September 1958).
Springs are good and work fine.
Valve moves up and down when the lever is moved (simulating the cable opening and closing the valve).
The tall “U” shaped metal piece that rests on top of the adjuster screw is missing.
The rubber plug / cover for the adjuster screw is also missing.

The post Heater Control Valve, Original. appeared first on Corvette & Classic Car Parts Store.

Suspension Polyurethan Bushing & Sleeve Lot, New 91 pieces.

John — Fri, 22 Sep 2023 15:01:14 +0000

These came to us from a closed up Corvette only repair shop.
Packages were opened.
Most of the packages had Vette Brake Product tags in them.
Here is what we know about these bushings and sleeves.
- Bushings
  - (4) with # 1020 molded on the ridge.
    - Each bushing is 1.475″ OD with an 1.009″ ID.
    - They are 1.925 outside height.
    - These come with (2) sleeves that are 1.006″ OD, 0.802″ ID and, 1.968″ tall.
  - (12) with # 1021 molded on the ridge.
    - Each bushing is 1-17/32″ OD with an 0.663″ ID.
    - They are 0.776 outside height
  - (4) with # 1022 molded in the ridge.
    - Each bushing is 1.528″ OD and 0.944″ ID.
    - They are 0.945 outside height.
  - (8) with # 1023 molded in the ridge.
    - Each bushing is 1.533″ OD and 0.778″ ID.
    - They are 1.019 outside height.
  - (8) with # 1024 molded in the ridge.
    - Each bushing is 1.530″ OD and 0.670″ ID.
    - They are 1.017 outside height.
  - (8) with #1025 molded on the ridge.
    - Each bushing is 1.35″ OD and 1.006″ ID.
    - They are 0.920″ outside height
  - (16) with no number molded on the ridge.
    - Each bushing is 1.371″ OD and 0.890″ ID.
    - They are 0.750″ outside height
  - (2) with no number molded on the ridge.
    - Each bushing is 1.253″ OD and 0.625″ ID.
    - They are 0.866″ outside height
- Metal sleeves
  - (7) 1.66″ tall, 0.875″ OD and, 0.625″ ID.
    - Wall thickness is 0.125″
  - (6) 1.961″ tall, 1.001″ OD and, 0.801″ ID.
    - Wall thickness is 0.101″
  - (4) 1.646″ tall, 0.877″ OD and, 0.515″ ID.
    - Wall thickness is 0.184″
  - (4) 1.675″ tall, 0.875″ OD and, 0.515″ ID.
    - Wall thickness is 0.175″
- Washer
  - (8) 2″ OD by 0.816″ ID by 0.155″ thick

The post Suspension Polyurethan Bushing & Sleeve Lot, New 91 pieces. appeared first on Corvette & Classic Car Parts Store.