coils Archives - Corvette & Classic Car Parts Store

Wiper Washer Jar Mount Bracket, Original

John — Tue, 19 Sep 2023 14:11:20 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 5-1/8″ x 4-3/4″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-5/8″ center to center.
Upper screw holes are 4-13/16″ center to center from the single lower mount screw hole.
Plating, in general, has tarnished.
Has some spotty areas of light to moderate rust on the inside and outside surfaces.
Metal is not pitted in these areas.
55 Chevy ???

John — Tue, 19 Sep 2023 14:06:20 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 5-1/8″ x 4-3/4″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-5/8″ center to center.
Upper screw holes are 4-13/16″ center to center from the single lower mount screw hole.
Plating, in general, has tarnished.
Has some spotty areas of light rust on the inside and outside surface.
Metal is not pitted in these ares
55 Chevy ???

John — Tue, 19 Sep 2023 14:03:04 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 4-13/16″ x 4-13/16″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-11/16″ center to center.
Upper screw holes are 4-7/8″ center to center from the single lower mount screw hole
55 Chevy ???

John — Tue, 19 Sep 2023 13:59:30 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 5-1/8″ x 4-3/4″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-5/8″ center to center.
Upper screw holes are 4-13/16″ center to center from the single lower mount screw hole.
Plating, in general, has tarnished.
Upper band has some areas of light rust on the inside and outside surface.
55 Chevy ???

John — Tue, 19 Sep 2023 13:49:31 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
We cleaned the paint off to see these.
The metal has very shallow pitting.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 cross recess sheet metal screw that tightens the bands together to hold the jar in place.
Inside dimension is 4-13/16″ x 4-13/16″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-11/16″ center to center.
Upper screw holes are 4-7/8″ center to center from the single lower mount screw hole.
The adaptor bracket is 2″ wide with a 2-1/8″ offset.
Fender mount bracket is pitted.
55 Chevy ???

John — Tue, 19 Sep 2023 13:29:00 +0000

Overall height is 5-1/2″ (excluding mount bracket).
Front, back and bottom bands are 2″ wide.
Bottom band has 2 rivets in the center that joins the front and back bands together.
On the underside of the bottom band is a series of patent numbers.
Upper band is 0.44″ wide and connects to the front and back bands with 2 rivets on each band.
Inside dimension is 4-15/16″ x 5″.
Mount bracket is 2″ wide with a 1″ offset.
Mount bracket screw holes are 1-21/32″ center to center.
Cad plating is still good.
This bracket has no signs it has ever been mounted.
56 Cadillac????

John — Tue, 19 Sep 2023 13:12:49 +0000

Wiper Washer Jar Lid, Original.

John — Tue, 19 Sep 2023 13:08:52 +0000

John — Tue, 19 Sep 2023 12:57:57 +0000

Vacuum, Co-ord, & Water stamps are crisp.
There is a “crease” line running from one side to the other going through the water nozzle.
The “TRICO” Label is tattered.
Has the water connection nozzle & fill cap
no vacuum connection.
Paint is a medium gray.
Back side is very clean and shiny.
The gasket is there and is new.
Gasket is not riveted to the lid.

John — Tue, 19 Sep 2023 12:52:32 +0000