Wiper Archives - Corvette & Classic Car Parts Store

Wiper Blade Holder, Trico 12-1/4″ long

John — Sat, 11 Nov 2023 18:04:22 +0000

John — Sat, 11 Nov 2023 17:56:17 +0000

There are 44 evenly spaced rubber dots & (3) 3/4″ long ribs running with the axis of the refill.
There is no manufacturer marks on it.

John — Sat, 11 Nov 2023 17:51:53 +0000

It is SS and is 11-1/4″ long.
Refill has Trico and patent numbers molded in the rubber.
It has evenly spaced dots and 2() 1-1/4″ long “ribs” running with the axis of the refill.
At each end there is 2 5/8″ long ribs.
Both dots and ribs are on both sides of the refill.

John — Sat, 11 Nov 2023 17:45:35 +0000

Blade holder is 10-7/8″ long with Trico stamped on one end.
Refill holder is 11-1/4″ long SS.
Rubber refill is 11″ long and has a series of patent & patent pending numbers but no manufacturer markings.
There are 44 evenly spaced rubber dots & (3) 3/4″ long ribs running with the axis of the refill.

John — Sat, 11 Nov 2023 17:36:58 +0000

Blade holder is 11-3/4″ long 4 lever type
It has the Trico stamp on each end.
Refill holder is SS and is 12″ long SS.
Rubber refill has a Series of patent & patent pending numbers but no manufacturer stamping.
It has 47 evenly spaced dots & (3) 3/4″ long ribs running with the axis of the refill.
There is also a 1/2″ long rib on each end.
Both the dots and ribs are on both sides of the refill.

John — Sat, 30 Sep 2023 15:10:21 +0000

John — Tue, 19 Sep 2023 14:11:20 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 5-1/8″ x 4-3/4″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-5/8″ center to center.
Upper screw holes are 4-13/16″ center to center from the single lower mount screw hole.
Plating, in general, has tarnished.
Has some spotty areas of light to moderate rust on the inside and outside surfaces.
Metal is not pitted in these areas.
55 Chevy ???

John — Tue, 19 Sep 2023 14:06:20 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 5-1/8″ x 4-3/4″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-5/8″ center to center.
Upper screw holes are 4-13/16″ center to center from the single lower mount screw hole.
Plating, in general, has tarnished.
Has some spotty areas of light rust on the inside and outside surface.
Metal is not pitted in these ares
55 Chevy ???

John — Tue, 19 Sep 2023 14:03:04 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 4-13/16″ x 4-13/16″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-11/16″ center to center.
Upper screw holes are 4-7/8″ center to center from the single lower mount screw hole
55 Chevy ???

John — Tue, 19 Sep 2023 13:59:30 +0000

Overall height is 5-5/8″ (excluding mount bracket).
Front, back, and bottom bands are 2″ wide.
Bottom band has (2) 1/16″ diameter drain holes.
On the underside of the bottom band is a series of patent numbers.
Upper band is 1″ wide and connects to the front and back bands with 4 rivets on each band.
Upper band has 1 slotted hex head machine screw with square nut that tightens the bands together to hold the jar in place.
Inside dimension is 5-1/8″ x 4-3/4″.
Mount bracket is 2″ wide with a 1/2″ offset.
Mount bracket screw holes are 1-5/8″ center to center.
Upper screw holes are 4-13/16″ center to center from the single lower mount screw hole.
Plating, in general, has tarnished.
Upper band has some areas of light rust on the inside and outside surface.
55 Chevy ???